Hydraulic submersible pumps are designed for the high demands in the construction industry.Our pumps are VORTEX pumps. VORTEX pumps are designed especially for dirty water with even very large solids. They have less wear on the impeller due to the Vortex design.Hydraulic pumps may run dry all Day without breaking down.The impeller at top sets the water in a circular movement and by centrifugal force a centre of air shaped like a cone will occur.
This way there is very little contact between the water and the impeller, and wear is greatly reduced compared to other types of pumps. In other types of pumps the water is pumped directly by the impeller, which is therefore worn much faster.Pumps of the special VORTEX design have longer life and can pump larger solids.Can be connected to Hydraulic power packs or excavators, trucks, tractors, etc.
The HWP4 water pump is in a class of its own. With a capacity of up to 204,000 liters per hour it can be used even in ground water lowering applications, where usually much bigger and extremely expensive pumps are being used.
Paired with for inance our 11 kW electric powerpacks it is a heavy duty solution with remarkable cost reductions compared with other pumping systems.
It will work all day every day. And can run dry without breaking.
| Model | HWP4 |
|---|---|
| Discharge | 4" |
| Max pumping head | 14 m |
| Max diameter of solids | 74 mm |
| Hydraulic flow range | 20-34 lpm |
| max pressure | 172bar |
| pumping capaicty | 204 m3/h |
| weight | 26.7 kg |
| dimensions | 50X37X45cm |